← All articles

Backhand Topspin Drills with a Table Tennis Robot

Six backhand topspin drills you can practise with a table tennis robot, from topspin consistency to opening against backspin, movement and random placement.

A backhand topspin improves with many repetitions of the same ball, followed by gradual changes in spin, placement and movement. A table tennis robot is useful for this because it can send the same ball again and again, then change one thing at a time.

The six drills below start with consistency and build towards match-like play. Each one lists the robot feed to set up and what to focus on.

Which backhand topspin drills should you practise with a robot?

#DrillRobot feedMain focus
1Backhand topspin consistencyMedium topspin to your backhand cornerRhythm, contact point, recovery
2Opening against backspinLong backspin to your backhandLifting the ball with brush, not push
3Backspin, then topspinBackspin, then topspin, both to your backhandAdjusting from opening to continuing
4Backhand corner to middleAlternate backhand corner and middleFootwork to get behind the ball
5Two backhands, one forehandTwo balls to the backhand, one to the forehandSwitching sides without losing shape
6Random backhand halfRandom placement across the backhand halfReading the ball and adjusting late

Start each drill at a speed and frequency where you can keep good technique. Increase speed, spin or ball frequency only once you can complete a set with few errors.

Drill 1: How do you build backhand topspin consistency?

Feed: medium topspin at medium speed, always to your backhand corner.

Play a controlled backhand topspin back towards one target area on the robot side of the table. Count how many you make in a row. When you can make most of a 15–20 ball set, raise the speed or the ball frequency a little.

Focus on a ready position with the bat in front of your body, contact in front of you and a compact stroke that finishes forward and recovers quickly for the next ball.

Drill 2: How do you practise opening against backspin?

Feed: long backspin to your backhand.

Against backspin, the ball needs more lift. Open the bat angle a little, start lower and brush up and forward through the ball rather than pushing it. Expect more errors into the net at first. Lower the robot’s ball speed until you can make the opening consistently, then increase it.

Drill 3: How do you switch from opening to continuing the rally?

Feed: a two-ball sequence to your backhand — backspin first, then topspin.

This is closer to a real rally: you open against backspin, and the next ball comes back with topspin. Your bat angle and stroke direction need to change between the two balls. Play the first ball with more lift and the second with a more closed bat angle and a more forward stroke.

Drill 4: How do you move between the backhand corner and the middle?

Feed: alternate placements between your backhand corner and the middle of the table.

Many backhand errors come from reaching for the ball instead of moving. Use small side steps so that your body is behind the ball for each stroke. Balls to the middle are often the hardest, because you need to decide quickly whether to play a backhand and move out of the way.

Drill 5: How do you practise switching between backhand and forehand?

Feed: two balls to your backhand, then one ball to your forehand, repeated.

This keeps the emphasis on the backhand while forcing you to recover to a neutral position after each stroke. If you lose the backhand shape after the forehand ball, slow the feed until the transition feels controlled.

Drill 6: How do you add unpredictability?

Feed: random placement across the backhand half of the table, with topspin.

Once fixed patterns feel comfortable, random placement trains you to read the ball and adjust your feet and timing late. Keep the spin the same at first and only randomise placement. When that is comfortable, add variation in spin or speed.

How do you set up these drills on PongFox?

There are three ways to set up these drills on PongFox:

  1. Build them in the PongFox app. Choose the spin, speed, placement and ball sequence for each drill, then save it so you can use it again.
  2. Record and save a rally. Use Record • Save • Replay to create, test and save a sequence such as Drill 5.
  3. Ask Voice Coach. Tell PongFox Voice Coach what you want to improve. In this recorded demo, the player says, “I would like to improve my backhand topspin,” and Voice Coach suggests drills for that goal. Its first suggestion is “counter to backhand”, repeating balls to the backhand — the same idea as Drill 1 above — and the player starts it by saying “Start drill one.”

Watch “Stuck on the Same Table Tennis Drills? Try PongFox AI” on YouTube →

You can also describe a specific drill by voice, including the number of balls and the serve, spin and placement for each one. Voice Coach suggests and plays drills; it does not watch your strokes or correct your technique.

Frequently asked questions

Can a table tennis robot help improve my backhand topspin?

Yes. A robot can send the same spin, speed and placement many times, so you can repeat a backhand topspin far more often than in a typical rally. It does not correct your technique, so a coach or video of yourself is still useful for checking your stroke.

Should I practise backhand topspin against topspin or backspin first?

Most players find it easier to build rhythm against topspin first, then add opening against backspin. Against backspin, the ball needs more lift and a more open bat angle.

How many balls should each set be?

Sets of 15–20 balls with short rests work well for most players. Keep the set short enough that your technique stays the same from the first ball to the last.

Can PongFox suggest backhand topspin drills for me?

Yes. Tell PongFox Voice Coach that you want to improve your backhand topspin and it suggests drills for that goal. You can then start a drill by voice.